At GeckoTek, we developed EZ-Stik to solve the two biggest problems in 3D Printing with one great product. EZ-Stik gives you excellent first layer adhesion and painless part release, every time! The difference is our Advanced Coating Technology. EZ-Stik is 3D Printing made easy!
EZ-Stik COLD is for printers with non-heated beds.
Here's what you get with EZ-Stik:
Reliable first layer adhesion every time
Safe and easy part removal when your job is done
Long lasting durability - Designed to last over 100 prints!
Works with a wide range of filaments - ABS, PLA, PETG, Nylon, and many more!
- Fits every 3D Printer! Easily cuts to size with household scissors
Reliable First Layer Adhesion: Our scientifically formulated Advanced Coating Technology provides maximum adhesion, eliminates warping, and ensures that your parts don't come off until your job is done.
Safe and Easy Part Removal: We created the EZ-Stik Build Surface so that you can stop worrying about breaking your parts during removal. With EZ-Stik, even the most delicate parts release with ease. No metal paint scraper required!
Long Lasting Durability: EZ-Stik Build Surfaces are designed to last over 100 prints without losing adhesion.
Material Flexibility: EZ-Stik works with multiple filaments, including ABS, PLA, PETG, Nylon, and more!
Fits Every 3D Printer: EZ-Stik can be easily cut down to size with household scissors to perfectly fit your print bed!
Printer Setup: You should re-level your printer's build platform after installing EZ-Stik. We recommend that you start with a slightly higher Z home position than you normally use and move it down as needed.
Using scissors, carefully trim the EZ-Stik Build Surface sheet to fit your print bed.
Clean your print bed to ensure it is free of dust and debris.
Remove the adhesive backing on the EZ-Stik sheet. Starting at one edge, press the sheet onto your print bed and smooth with fingers to push out air bubbles.
- Start printing!
Part Removal: When printing finishes, allow part to cool down completely. Remove part from print bed by hand, or apply gentle pressure with a plastic removal tool. Metal scrapers or other tools are NOT recommended.
Care & Cleaning: We recommend that you give the EZ-Stik surface a quick wipe with an alcohol pad every five to ten prints. That's it!