EZ-Stik Cold 3D Printer Build Surface

Never worry about warping or removing stubborn parts again. Developed specifically to meet the needs of hobbyists and educators, EZ-Stik Cold is the first Reliable, Re-usable Build Surface for printing PLA without the need for a heated bed. Simply cut your EZ-Stik surface to size with standard scissors, then use the peel and stick adhesive backing to attach to your build platform.

$15.00$108.00

Clear
$15.00$108.00
Size 155 x 155 160 x 247 200 x 210 220 x 255 250 x 250 300 x 300 400 x 400
quantity 1 pack 3 pack
Clear selection
SKU: EZRT Category: Tags: ,

Description

Eliminate Warping

We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.

Easy Part Removal

We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.

Fits Every 3D Printer

EZ-Stik is easily cut to size using regular scissors or a paper cutter, and can also be tiled to cover large printer beds. It is equipped with a pressure-sensitive adhesive backing. The thick, durable polymer film makes it easy to get a smooth, bubble-free application.

Lasts Over 100 Prints

Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.

Maintenance and Cleaning

There is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.

Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.

Not sure what size you need? Check out our EZ-Stik size matching system.

Additional information

Weight16 oz
Size

155 x 155, 160 x 247, 200 x 210, 220 x 255, 250 x 250, 300 x 300, 400 x 400

Quantity

1 pack, 3 pack

Works with (among many others): BIQU Magician, Dagoma Neva, Dremel 3D40 and 3D20, Flashforge Finder, iNSTONE Easier, Makerbot Replicator Mini+, Z10, Replicator 2, Replicator+, Mostfun Ultimate, New Matter MOD-t, Panowin F1, Polar 3D, Sindox 3DWOX DP201, Ultimaker 2 Go, Ultimaker Original, Weedo M2, and XYZprinting da Vinci miniMaker, da Vinci mini w, da Vinci Jr. 1.0, 1.0w, 2.0 Mix, and da Vinci Jr. Pro.